, ,

ME108 | IDUINO RELAY INTERFACE SHIELD 5V 4 CHANNEL

SKU: ME108

Availability:

3 in stock


Arduino™ Compatible

3 in stock

Quantity Price Per Unit
1+ $8.25 Incl GST $7.50 Excl GST
10 $7.15 Incl GST $6.50 Excl GST

This is a 4-channel LOW level trigger relay and it can be applied to Arduino and Raspberry Pi. Relays are suitable for driving high power electronic devices such as lights, electric fans and air condition. A relay can be used to control high voltages with a low voltage by connecting it to an MCU.

  • Support control of 10A 30V DC and 10A 250V AC signals
  • 5V 4-Channel Relay interface board
  • LOW level trigger, equipped with indicator easy to recognize the working status
  • Each relay has NO and NC ports, easier to connect and control the connected devices
  • VCC: Connected to positive supply voltage (supply power according to relay voltage)
  • GND: Connected to negative supply voltage
  • IN1: Signal(LOW Level) triggering terminal 1 of relay module
  • IN2: Signal(LOW Level) triggering terminal 2 of relay module
  • IN3: Signal(LOW Level) triggering terminal 3 of relay module
  • IN4: Signal(LOW Level) triggering terminal 4 of relay module

The meaning of high and low level:
INx stands for the contacts including IN1, IN2, IN3 and other pins in the following part.
Triggered at high level means a forward voltage exists between signal triggering terminal (INx) and negative supply voltage. It generally connects positive supply voltage and triggering terminal together. When triggering terminal has positive supply voltage or reaches triggering voltage, the relay will pull in.
While triggered at low level means the voltage between the signal triggering terminal (INx) and negative supply voltage is 0V, or the voltage at the triggering terminal is lower than positive supply voltage. If it lowers to a triggering voltage, the relay will pull in. It generally connects negative supply voltage and triggering terminal together.

Output:
Each submodular of the relay has one NC(nomalclose), one NO(nomalopen) and one COM(Common). So there are 8 NC, 8NO and 8 COM of the channel relay in total. NC stands for the normal close port contact and the state without power; No stands for the normal open port contact and the state with power. COM means the common port. You can choose NC port or NO port according to whether power or not.

Facebook
Instagram